Guitars using Mahogany body & neck:

 T2 Deluxe Drop-Top, ordered directly from Giffin Guitars: $2,950 

T2 Deluxe Flat-Top, ordered directly from Giffin Guitars: $2,900

Guitars using Black Limba body & neck:

(Please note that Black Limba (body and neck wood) is now a $150 upgrade, due to increased difficulty to obtain suitable material.)


   (All instruments ordered directly from me are considered "custom orders" even if they fit within the basic model specs.)

Please contact my dealers for availability and retail price for already built Giffin guitars.

   Any custom guitar ordered using parts and materials from this light blue box section should fall within the basic model price, and will not add to the price. 

Any custom option from the dark blue box below will add to the price by the amount shown.

Materials used for basic models:
Wood:                                                                                             The Wood  Pile
Body:  Philippine Mahogany, Honduras Mahogany, African Mahogany
Neck:  Laminated Honduras Mahogany
Top wood: (Drop-tops and Flat-tops only), Figured Maple  (please check "The Wood Pile" for  examples of available wood)
Fingerboards:  Indian Rosewood
Hardware:
Tuners:   Gotoh, Kluson or Grover
Bridge:  Wilkinson, TonePros, ABM or Pigtail
Pickups:  Humbuckers or P90s - Amalfitano, Kent Armstrong, Razor, Wolfetone, Gibson, Voodoo or Lindy Fralin
Guitar controls: 1-volume, 1-tone (CTS pots) Switchcraft selector on 2-pickup models

Neck dimensions:
Scale Length:  24 3/4 inches
Width at nut:  1 11/16 inches, width at 22nd fret:  2 1/4 inches.
Neck thickness at first fret:  .890 inches to .910 inches.  Thickness at 12th fret:  .990 inches to 1.000 inches.
General neck shape is based on a 50's Gibson  which is a 'C' shape at the body end tapering down to a slight
'V' shape at the nut end.
Neck/body joint:  Neck joins body at 21st fret.  Heel is cut away to an unobtrusive but safe minimum.